Clean Tank Assembly for CrossWave Wet/Dry Vac 1614237
Clean Water Tank Assembly for the Bissell CrossWave Pet, Series 2305, 2306, 2328. To fill your clean water tank follow these instructions: The clean water tank is located on the back of the machine. Lift the clean water tank straight up to remove from the machine. Unscrew the cap from the clean water tank. The clean water tank has two measuring volumes depending on the amount of space you would like to clean. For large area cleaning (up to 700 sq ft) – fill formula tank with warm tap water to the second water fill line. Then add formula to the second formula fill line. For small area cleaning (<350 sq ft) - fill formula tank with warm tap water to the first water fill line. Then add formula to the first formula fill line. Screw the cap back onto the clean water tank. On the back of the machine, align clean water tank with the grooves and slide tank into place until you hear a click. NOTE: Fill with warm (140 degrees F/ 60 degrees C MAX) tap water and add the appropriate Bissell Solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE.